CRT Crush Tester is an efficient and easy to use equipment intended for testing paper, corrugated board and its components as well as performing compression tests on small packages. Sturdy design of the instrument ensures that the parallelism of the plates is maintained for accurate results.
Features
• Single push button operation activates an automatic 12 tests cycle, determining rapidly the FCT, RCT, ECT, PAT etc.
• A group of 12 tests can be performed for report.
• Histogram for immediate visual review.
• Auto Calibration in 5 simple steps.
• 3 units of measurement (N, Kgf & lbf)
• Overload protection (Preset).
• Accept or reject validation.
• Acceptable and non-acceptable limit set.
• Average of test results on the report.
• Changeable peak detection level for different test.
• Programmable User Name, Product Name, Vendor / Customer Name, Codes, Lot No., etc.
• Date & time stamping.
• Available in measuring range of 100, 250 & 500 kgf.
Technical Data
Measuring Unit: Breaking force in N, Kgf and Lbf
Test Speed: 12.7 +/- 1 mm per minute.
Accuracy: +/- 1% of measured value.
Plate Size: 150 mm dia. parallel top & bottom plate
Admit Between Plates: 25 ~ 150 mm
Net weight : 87 kgs (192 lbs)
Gross Weight : 140 kgs (308 lbs)
Depth : 431 mm (17 in.)
Height : 559 mm (22 in.)
Width : 686 mm (27 in.)
Tests according to the standards as below:
ECT: TAPPI T811 and T823, ISO 3037. RCT: TAPPI T818 and T822. PAT: TAPPI T821. CMT:TAPPI T809, ISO 7263. FCT: TAPPI808, ISO 3035
RCT Accessories included
Sample Holder: An aluminum metal block containing annular groove 6.35 mm (1/4”)deep and with an outer diameter of 49.30mm (2”) supplied with eight removable discs for different thickness of test strips.
Thickness of test: Min 0.15 mm (0.006”) with replaceable 8 disc
Specimen mm: Max 0.49 mm (0.02”)
|
